wong.michael888 – whiteshutterblinds.com

The advantages of aluminum blinds

wong.michael888 — Wed, 26 Jun 2019 08:40:42 +0000

The advantages of aluminum blinds

Aluminum shutters are loved by more and more people in modern home decoration. As one of the many kinds of blinds, its beautiful shape and high durability have become one of the reasons why many people choose.

If consumers consider installing blinds, they must think of a question: what are the advantages of aluminum blinds, and why should I choose them? According to the characteristics of aluminum blinds, it is easy to decide whether to use them, so I will take you to understand the characteristics of aluminum blinds.

1. Light weight

Aluminum alloy material is mostly hollow core thin wall composite section, easy to use, reduce weight, and the cross section has high bending strength, the doors and windows are durable and not easy to deform.

2. Good sealing

The aluminum alloy is easy to extrude, the cross section size is accurate, and the machining accuracy is high. Most of them are waterproof, elastic and durable sealing materials, such as rubber strips and silicone sealants.

3. Strong weather resistance

Aluminum alloy oxide generally does not fade, does not fall off, and it is not easy to alter, easy to maintain, no need to repair.

4. Beautiful appearance

The surface of aluminum shutters is smooth and shiny after oxidation.The sash frame is large and can be set with a large area of glass, which makes the indoor light bright and bright, enhances the contrast between the interior and exterior, and makes the living room more richer.

By understanding these advantages, we can see that aluminum blinds are a very good sunshade product, both indoors and outdoors.

However, aluminum louvers are more suitable for outdoor shading because of their outstanding weather resistance. In Japan, there is a building that uses aluminum panels for exterior shading. In order to reduce the radiant heat in summer, there are no design openings on both sides of the building.

The system is capable of controlling the circulation of warm air. The principle is to allow warm air to rise through the interior of the double wall to the louver vents.

The area of the outer aluminum pane changes by adjusting the angle, width and length of the panel，and the louver aperture is determined based on the opening of each room and attic, the location of the vents and the air conditioning exit.

According to the change of sunlight and the passage of time, the window sash uses the angle of change to control the light intensity to achieve the desired shading effect. The middle outer courtyard can be seen from the inside.

Lights were placed on the western wall. Since the placement of the lamps is not uniform, Therefore, by dividing the irregularity of the light, to expand the sense of flow in the space and generate a space of expressiveness.

Compared with the design-style shutter building in Japan, there is a “no style” apartment building in Singapore that also uses aluminum blinds to shade.

The designer of the apartment building believes that “it is important to have more and more buildings, but it is also important to become more interesting.”

Because Singapore is located in the tropics, the trick of building in the tropics is not how to avoid the sun, but it is connected to the room through a series of shading methods.

Therefore, the filter of the building uses a louver system that can be independently controlled by residents, so that they can independently adjust temperature, control noise and protect privacy by freely controlling the opening and closing of blinds, while at the same time reducing the air conditioning consumption of the building.

The design faces the south and the daylight penetrates the building to reduce the reliance on artificial lighting. Natural cross ventilation is felt at all corners and has a wide exterior with operable aluminum sun blinds to keep the interior cool.

Each apartment also has an open layout to provide the extra flexibility, and there is also a terrace at the bottom of each building as an “outdoor living space”.

The blinds in the glass

wong.michael888 — Mon, 15 Apr 2019 08:25:20 +0000

Blinds in the glass are put the aluminum blinds into the hallowed glass, could be used in the window, doors.

Blinds in the doors

Blinds in the windows

Blinds in the glass, the sunshade materials could be metal, PVC blinds.

The aluminum blinds

The central part of the blinds in the glass could be manual, magnetic and electric, and the magnetic is more popular. Because of the manual is easy to appear the line broken and slats locking, and the electric is more expensive.

1.Pull on the rope control

The limited size of the manual blinds in the glass, less than 1220mm(Width)*2220mm(Height)

2.Magnetic control

This way could keep the middle air layer airtight, the whole assembly process should keep the air drying and filling the Inert gas between the blinds and glass.

3.Electric control

By the motor driver to control the lifting and turning of the blinds. The air layer width should more than 27mm, to have enough space to fit the motor.

The electric control system, signal glass size could be 55 sqm max, then fit the motor size in accord with the weight of blinds.

Building glass products all need good light transmission and visual field, so to use of horizontal louvers as shading products on the glass is undoubtedly an excellent choice to enable the horizontal line of sight without any shade.

Doors and Windows are important facilities for dividing the inside and outside of the building. The use of medium louvered Windows can effectively save space, at the same time, it has excellent shading and private functions and can achieve indoor constant temperature and noise reduction. The building facade can achieve a unified visual effect.

Along with the building design level unceasing enhancement, our country is more and more high to the building door window design request, needs to achieve the energy conservation, the artistic, the shading, the comfortable and so on, many areas have carried on the mandatory stipulation to the building door window shading facility.

Therefore, the use of aluminum blinds in the doors and windows, plastic hollow doors and blinds in the glass has become the first choice of many building shading facilities.

The advantages of the blinds in the glass:

1. Good shading performance

The middle shading louver insulating glass can reduce the shading coefficient SC to about 0.2, which is better than the shading coefficient of hollow Low-E glass (usually 0.35-0.45).

2.Energy conservation and environment protection

The middle louver is placed in the glass hollow clip cavity, because of the poor thermal conductivity of the air, sound transmission, can maintain the indoor temperature, placed in the room too hot or too cold, reduce the use of air control equipment power and frequency, but also has a good anti-noise function.

3.Save space

The biggest difference between the blinds in the glass and other shading products is that the shading facility is located in a closed and narrow space, which can be compatible with the glass window, and there is no need to add additional space required by the shading facility, which saves the limited indoor area.

4.Low maintenance charge

Some external shading facilities are prominent in the building facade, which not only affects the aesthetics of the building but also increases the construction cost and daily maintenance cost. In buy louver is sealed between two glass, because this need not worry about the sanitation problem of the louver, want to maintain the cleanness of glass only ok.

5.Adapt to different areas of shading needs

Different areas have different shading requirements. Northern areas should be mainly thermal insulation to ensure adequate sunshine and sunshine; The central region has higher requirements on heat preservation, insulation, lighting and ventilation. Southern areas emphasize better shading and natural ventilation to reduce room temperature.

The blinds in the glass of doors have the performance of dynamic energy saving, meet the different shading requirements under various climatic environments, but also a kind of beautiful, safe, low maintenance cost shading products.

6.High safety

Blinds in the glass are extremely good windproof, fireproof sunshade product, does not have pull rope, do not worry about children, pet to encounter danger because of operating pull rope, also need not worry about louver to be able to scratch them.

7.Various types of use

With the improvement of technology, its waterproof performance and anti-aging performance can be enhanced, the combination of the middle louver and the building facade glass Windows and glass doors greatly increases the specific form of use.

Type of blinds in the glass

Type of blinds in the glass of doors

The blinds in the glass are the crystallization of traditional shading products and new technologies. It has the comprehensive functions of insulating glass and louver, including shading, heat preservation, sound insulation, daylighting regulation, fire prevention, cold resistance, privacy, space saving, and easy cleaning.